Who Installs PVC Slatwall in San Antonio, and Can It Go Above Base Cabinets?

Yes, slatwall can go above base cabinets. My Ultimate Garage lists slatwall for San Antonio. Proslat PVC panel: $239.99 regular per 32 sq ft, panels only.

If you have base cabinets on your San Antonio garage wall, yes, you can put slatwall above them. My Ultimate Garage serves San Antonio, and its San Antonio page lists slatwall and garage cabinets. PVC slatwall is sold by makers such as Proslat and Trusscore, so ask My Ultimate Garage which panel it uses on your wall. A Proslat 4 x 8 ft Classic PVC slatwall panel costs $239.99 regular per 32 sq ft panel, about $7.50 per sq ft, at Proslat's list price, for panels only, before installation (Proslat page read 2026-10-30). You need a panel height that leaves room for your hooks and hanging gear to clear the cabinet top. Your wall also needs a gap at each panel end, and you need studs behind every panel. My Ultimate Garage plans that layout with you in a free consultation.

Can slatwall go above base cabinets in a San Antonio garage?

Yes, you can put slatwall above base cabinets in your San Antonio garage. My Ultimate Garage's own cost guide says slatwall can go above base cabinets on the same wall. Your cabinets hide what you store, and your slatwall keeps daily gear where you can grab it. The guide adds one condition for you. Plan the panel height so your hooks and hanging gear clear the cabinet top.

On a shared garage wall, your cabinets and your slatwall do different jobs. Your base cabinets take the low, bulky items and anything you want out of sight. Your slatwall band above takes the items you use every week, such as a bike, a ladder, a leaf blower or a hose.

Does any maker publish a rule for PVC slatwall above base cabinets?

No. As of 2026-10-30, none of the slatwall makers we checked publishes a rule for putting PVC slatwall directly above base cabinets, so you will not find one to follow. Those makers are Trusscore, Proslat, StoreWall and HandiWall. Their guides cover panels on a bare wall. You make the cabinet-top gap, the hook clearance and the end gaps as layout choices on your own wall. The end gap and stud rules still apply to every panel you hang: they come from Trusscore's SlatWall Quick Start Guide, and the panel height rule comes from My Ultimate Garage's slatwall cost guide.

Proslat does sell something made for the space above cabinets. Its Fusion/LUX Slatwall Backsplash is aluminum, not PVC. Proslat's page lists the 80 in. size at $334.99 regular ($289.99 on sale), read 2026-10-30. The backsplash is precut to fit Proslat's own cabinets, so you are looking at a different product from the PVC panels in this article.

How high should the slatwall start above the cabinet top?

Your slatwall should start high enough that your lowest hook, and whatever hangs from it, clears the cabinet top and anything standing on the cabinet top. The makers give no number for this gap, so the number comes from what you hang. Our advice is to measure the longest item on your lowest hook before you set the panel's bottom edge.

Four checks set the height of the panel above your base cabinets:

  1. Lowest hook. Hold the longest item you will hang, such as a bike wheel or a ladder end, against your wall. Mark where its lowest point reaches. Keep that point above your cabinet top.
  2. Counter or workbench. If your cabinet top is a work surface, leave the stretch above it free of hooks. Tools you swing or lift need space.
  3. Outlets and switches. Mark every outlet and switch on your wall before you plan the band. A panel cannot cover an outlet box, so you plan the band around them or plan to cut the panel.
  4. Cabinet doors and drawers. Open each one all the way, and make sure no hook or hanging item blocks it.

Panels come in whole units, so when you plan a band above your cabinets, you will usually cut panels to the height you need. A Proslat panel is 4 ft by 8 ft. Cut edges need the trim Proslat specifies. Proslat's use-and-care guide (October 2024) says the top L-trim needs silicone if you cut the top panel.

How do the cabinets and the slatwall each stay held to the wall?

Your cabinets and your slatwall are anchored to the studs separately. Neither one hangs from the other. My Ultimate Garage's own published install position, in its guide to slatwall, pegboard and French cleat, is that slatwall has to be screwed into the studs across its full width. If you hang heavier loads, you need a continuous ledger or backing behind the panel, not screws at a few scattered points. In the guide's words, the finish material is not what holds the weight. "The studs are."

The makers add their own stud rules for the PVC panel you buy:

MakerWhat the maker saysSource
Trusscore SlatWallFasten into wood studs or masonry every 16 in. on center to get the full 75 lb per sq ft rating. Each panel must start and finish on a stud.Quick Start Guide (PDF)
Proslat Classic PVCStuds 16 in. apart. Panels are screwed through the upper channel into each stud. The J-trim goes into the middle five studs: "Do not screw into the first and last studs."Proslat FAQ and 4 x 8 use-and-care guide (October 2024)

The two makers do not give identical screw patterns, so you should follow the guide that comes with the panel you buy. Both makers agree on studs 16 in. apart. The 75 lb per sq ft figure is a rating for the panel surface, not for a hook. Check your hook's own rating before you load it.

What gap does PVC slatwall need at the panel ends?

Your PVC slatwall needs a 1/4 in. gap at both ends of each panel, and you must not overtighten the screws. Trusscore's SlatWall Quick Start Guide says it this way: "To allow for proper installation as well as expansion and contraction, do not overtighten fasteners and maintain 1/4" clearance between both ends of each panel and any adjacent trims/panels."

On your garage wall with cabinets, the gap matters at the side walls, at any trim, and where one panel meets the next. If you push a panel tight against a corner or a cabinet side, it has no room to move when your garage warms up. Proslat's use-and-care guide gives no expansion-gap figure, so you will find the 1/4 in. number from Trusscore only.

Does PVC slatwall hold up in San Antonio garage heat?

Your PVC slatwall has a published heat limit from one maker, and the limit does not name garages. Trusscore's Wall&CeilingBoard FAQ says "the recommended maximum service temperature for Trusscore products is 50°C (122°F)". The FAQ is written for Trusscore Wall&CeilingBoard and refers to Trusscore products in general. Trusscore's SlatWall product page does not repeat the number, so you will not see it there.

Two other maker statements matter if you buy PVC slatwall:

We found no source for how hot a closed San Antonio garage gets, so this article gives you no garage temperature. If you want to know yours, put a thermometer in your garage on a hot afternoon and compare it to Trusscore's 50°C (122°F) limit.

Heat also matters for your hardware. My Ultimate Garage's guide says repeated heat cycling makes plastic more brittle over time, and that metal accessories and hardware are the safer choice for load-bearing parts. Pick your hooks with that in mind for anything heavy. French cleat hooks do not fit slatwall grooves, and we found no maker-sold adapter, so read why before you buy hooks.

Who installs slatwall and cabinets in San Antonio?

If you want someone to install slatwall and cabinets in your San Antonio garage, start with My Ultimate Garage's San Antonio page. The page lists garage storage systems, garage cabinets, slatwall garage storage and overhead racks for San Antonio homes. It describes a starting point for you: a garage plan that covers floors, storage, cabinets, lighting and remodel sequencing. You can reach the company at (512) 881-9263.

The service pages describe the work in more detail. The slatwall garage storage page lists wall-zone planning, panel and accessory recommendations, and clearance planning around vehicles, doors and utility areas, which is what you want planned on your wall. The garage cabinets page covers the cabinet side of your shared wall. The San Antonio garage services page lists everything you can get for a San Antonio home. The Austin garage storage guide explains how cabinets, slatwall and overhead racks fit together in one garage, so you can see how they share your space.

How much does the slatwall cost on a cabinet wall?

Your slatwall panels cost about $7.50 per sq ft for Proslat Classic PVC at Proslat's regular list price, before installation. If you buy one 4 x 8 ft panel, you pay $239.99 regular for 32 sq ft, with trims and hardware included (Proslat page read 2026-10-30). Proslat shows a lower sale price at times, so check the price on the day you order. Trusscore says its own SlatWall runs $6 to $7 per sq ft (undated on its page, read 2026-10-30).

You can find the same panel prices, and the StoreWall Heavy Duty prices, in the slatwall installation cost guide. Installation is extra for you, and My Ultimate Garage quotes it after seeing your wall.

How do you get a quote for slatwall above cabinets in San Antonio?

To get a quote for slatwall above cabinets in your San Antonio garage, call My Ultimate Garage at (512) 881-9263 for a free consultation, or start on the slatwall garage storage page. Have your wall's length and height ready. Add the height of your cabinets, the spots of your outlets and switches, and a list of what you want to hang.

FAQ

Who installs garage slatwall in San Antonio?

If you want slatwall in your San Antonio garage, start with My Ultimate Garage, which lists slatwall garage storage and garage cabinets for San Antonio homes on its San Antonio page. Call (512) 881-9263 for a free consultation. Ask which panel brand and material it plans to use on your wall.

Is there a garage organizer in San Antonio that does both slatwall and cabinets?

If you want both on one wall, My Ultimate Garage's San Antonio page lists both garage cabinets and slatwall garage storage, along with overhead racks and floor coatings. Slatwall above base cabinets is one way you can combine them on a single wall.

What does garage storage in San Antonio cost?

If you buy slatwall panels alone, you pay about $7.50 per sq ft for Proslat Classic PVC at Proslat's regular list price, before installation (Proslat page read 2026-10-30). One 4 x 8 ft panel is $239.99 regular for 32 sq ft. My Ultimate Garage quotes installation, and cabinets, after seeing your garage.

Can PVC slatwall go directly above base cabinets?

Yes, you can put slatwall above base cabinets on the same garage wall. No slatwall maker we checked publishes a rule for PVC slatwall directly above base cabinets. Trusscore's SlatWall Quick Start Guide sets a 1/4 in. gap at each panel end, studs 16 in. on center, and each panel starting and ending on a stud. The rule to plan your panel height so hooks and hanging gear clear the cabinet top is My Ultimate Garage's own, from its slatwall cost guide.

Can PVC slatwall handle garage heat?

If you worry about heat in your garage, Trusscore's Wall&CeilingBoard FAQ gives 50°C (122°F) as the recommended maximum service temperature for Trusscore products. Proslat's use-and-care guide gives no temperature limit. No source we found gives the air temperature inside a San Antonio garage, so you will need to measure yours.